Virtual CD Server - StorPoint

System Prerequisites
You will need the following network components:

Windows 3x/95/98/NT, Novell NetWare, UNIX, or Macintosh network using 10/100Base-TX
TCP/IP enabled on the workstation that will administer the Virtual CD Server.
An Internet web browser loaded on the administration workstation.
Ethernet patch cable to attach the Virtual CD Server to the network.

Physical Connection

1. Insert the Category 5 Ethernet patch cable into the RJ-45 connector at the rear of the Virtual CD Server. Insert the other end into a network hub.
2. Connect the power cable to the Virtual CD Server and plug it into the power strip or outlet. Use of a surge protector is strongly recommended for long system life.
3. Turn on the Virtual CD Server.

Click here to begin a step-by-step setup of the Virtual CD/DVD Server.

More advanced uses may wish to browse through the links below for assistance.

Setup IP address	General Administration
Managing CDs	User Management
Security	Reset the unit to factory defaults