Virtual CD Server - Axonix

System Prerequisites
The Virtual CD Server requires the following network components:

A TCP/IP network using 10/100BaseT Ethernet and Category 5 RJ45 cabling.
A Windows 9x/NT computer for system administration.
Ethernet patch cable to attach the Virtual Server to the network.

Physical Connection

1. Insert the Category 5 Ethernet patch cable into the RJ-45 connector at the rear of the Virtual CD Server. Insert the other end into a network hub.
2. Connect the power cable to the Virtual CD Server and plug it into the power strip or outlet. Use of a surge protector is strongly recommended for long system life.
3. Turn on the Virtual CD/DVD Server.

The Virtual CD Server is a "plug-and share" mixed drive direct network-attached storage device, with embedded multi-protocol software. Industry standard communication protocols for Novell (NCP), Microsoft Networks (SMB), and Web browsers (HTTP) are used to access the Virtual CD Server. The unit's standard configuration is for a 10/100BaseTX Ethernet network, and is based on a FAT16 file system, which requires the "8.3" naming convention (8-character maximum file name, 3-character maximum extension) for all volumes mounted on the Virtual CD Server.

Administration of the unit is done using the CDVision Administrator program. The program runs under Windows 9x/NT.

1. Download the program installation file.
2. Unzip the file. As part of the unzip process, the installation will begin.
3. Accept the screen defaults to install the program.

Click here to begin a step-by-step setup of the Virtual CD Server.

More advanced uses may wish to browse through the links below for assistance. Please select a link for further information on specific technical issues

Initial setup	TurboCaching
User Management and Remote Authentication	Security
NetWare Issues	NT Issues and WINS/LMHOSTS
Disaster Recovery	Known Conflicts